Physical & Environmental Test Support Services
With 14 environmental chambers ranging in size from 1ft³ to over 1,000ft³, including one of the largest walk-in chambers in New England, measuring 15ft x 10ft x 8ft, our ISO 17025 and ISTA-certified Test Laboratory Partner can perform a broad range of test activities ranging from Audio, Airflow, Altitude, Burn-in, EMI, ESS, Humidity, IPX Water Testing, Mechanical Shock, Salt Spray/Salt Fog Testing, Temperature, Thermal Shock, Packaging Transportation Simulation, Drop Test, and Vibration.
While the actual physical testing takes place at our Test Laboratory Partner, TEN TECH LLC engineers in our Los Angeles office will assist our customers for the following activities:
- Pre-test and test planning, including sensor types and locations selection
- Test Supervision & Data Acquisition Monitoring
- Test data post-processing & report generation
- Analysis/Test Model Correlation & Update.
Shock & Vibration Testing
Broad range of vibration and shock testing including Sinusoidal , Random , Sine-on-Random, Combined Temperature and Vibration Testing, Accelerated Life Testing (HALT), ESS Vibration Testing, Repetitive Shock Test, Half Sine Shock Pulse, Saw Tooth Shock Pulse per IEC 68-2, MIL-STD-810G, ISTA 1A, 2A , ASTM D4169 standards.
Salt Spray Corrosion Testing
Salt Spray chamber with dimensions of approximately 47″x32″ is fully equipped and capable of performing corrosion testing per the ASTM B117, MIL-STD-202 and MIL-STD-810 standards.
ISTA Package Testing
Certified by the International Safe Transit Association (ISTA) to perform a full range of package testing per ISTA, AMAZON, FEDEX, and ASTM standards. Packaging of all sizes can be tested, with test chambers ranging from 1 ft³ to full sized walk-in chambers with over 1,000 ft³, all of which are capable of performing environmental testing per the ISTA standard.
Temperature & Humidity Testing
With 14 environmental chambers ranging in size from 1 ft³ to over 1,000 ft³, covering temperatures from below -100°C to temperatures exceeding 200°C, a wide range of temperature/humidity conditions on a variety of different product shapes and sizes can be tested.
Intrusion Protection (IPX) Testing
Capability to perform IPX Water testing (IPX-1 to IPX-8 codes) per numerous IEC standards, including IEC 60529. This testing is designed as a means to verify that the products’ internal components are adequately sealed and protected from the intrusion of foreign objects, liquids, and fine particles. We can perform IPX-1 to IPX-8
The Semi-Anechoic test chamber allows a full range of acoustic tests for Sound Pressure and Sound Power per ISO 7779 and ANSI S12.10 as well as ANSI S12.11, INCE TG CBE and ISO 10302 standards.
The airflow test chamber with a VFRR of 0 to 450 CFM allows for System Impedance Determination, Air Mover Characterization, Air measurement velocity within your product, Airflow testing at varying air inlet temperatures and Infrared imaging of component temperatures while varying air velocity and inlet air temperature.
Thermal Shock Testing
A specially designed Thermal Shock Chamber which works like a turnstile to shuttle units between extreme hot and extreme cold conditions can replicate MIL-STD-810, MIL-STD-202 and numerous ASTM standards.